Detection flags (8 columns)
- SUM_FLAG (J)
The summary flag of the detection is derived from the EPIC flag (EP_FLAG, see 2XMM UG Sec. 3.1.2 h) and Sec. 3.2.6
but note also sections 3XMM-DR4 UG 3.11 and 3.7). It
is 0 if none of the nine flags was set; it is set to 1 if at least
one of the warning flags (flag 1, 2, 3, 9) was set but no
possible-spurious-detection flag (flag 7, 8); it is set to 2 if at
least one of the possible-spurious-detection flags (flag 7, 8) was
set but not the manual flag (flag 11); it is set to 3 if the manual
flag (flag 11) was set but no possible-spurious-detection flags (flag
7, 8); it is set to 4 if the manual flag (flag 11) as well as one of
the possible-spurious-detection flags (flag 7, 8) is set. The meaning
is thus:
0 = good,
1 = source parameters may be affected,
2 = possibly spurious,
3 = located in a area where spurious
detection may occur,
4 = located in a area where spurious
detection may occur and possibly spurious.
For details see 2XMM UG
Sec. 3.2.7
but note that flag 12 is no longer used in 3XMM-DR4 (see section
3.11)
EP_FLAG (12A) SAS task
dpssflag
EPIC flag string made of the flags 1 - 12 (counted from
left to right): it combines the flags in
each camera ((PN_FLAG, M1_FLAG, M2_FLAG), that is, a flag is set in
EP_FLAG if at least one of the camera-dependent flags is set. See 2XMM UG Sec. 3.1.2 h)
and Sec. 3.2.6 for a
detailed description of the flags.
PN_FLAG (12A) SAS task
dpssflag
PN flag string made of the flags 1 - 12 (counted from left
to right) for the PN source detection. A flag is set to
True according to the conditions summarized in Tab. 3.1 for the
automatic flags, and Tab. 3.1 for the
manual flags. In cases where the camera was not used in the source
detection a dash is given. Where a source was not detected by the
PN the flags are all set to False (default).
M1_FLAG (12A) SAS task
dpssflag
MOS1 flag string made of the flags 1 - 12 (counted from left
to right) for the MOS1 source detection. A flag is set to
True according to the conditions summarized in 2XMM UG
Tab. 3.1 for the
automatic flags, and Tab. 3.1 for the
manual flags. In cases where the camera was not used in the source
detection a dash is given. Where a source was not detected by the
MOS1 the flags are all set to False (default).
M2_FLAG (12A) SAS task
dpssflag
MOS2 flag string made of the flags 1 - 12 (counted from left
to right) for the MOS2 source detection. A flag is set to
True according to the conditions summarized in 2XMM UG
Tab. 3.1 for the
automatic flags, and Tab. 3.1 for the
manual flags. In cases where the camera was not used in the source
detection a dash is given. Where a source was not detected by the
MOS2 the flags are all set to False (default).
TSERIES
(L)
The flag is set to True if this detection has a time series made
in at least one exposure (cf. Sec. 3.6).
SPECTRA
(L)
The flag is set to True if this detection has a spectrum made in
at least one exposure (cf. Sec. 3.6).
HIGH_BACKGROUND
(L)
The flag is set to True if this detection comes from a field
which, during manual screening, was considered to have a high background
level which notably impacted on source detection (see Sec. 6.1.2).
This column is not used in 4XMM-DR9.